Both bombs painted.

Finally have both bombs finished off. After playing around with various masking techniques, I decided to make the proper sized hole in a bit of heavy chip-board I had. I taped a few “fingers” on the back so I could hold in it in place, and sprayed away. Worked pretty well.

The paint is Testor’s Model Master olive drab and yellow. Then then have a complete coat of flat clear. Hopefully that will keep the paint on for a few drops.

The arming fuses are in place and the little propellers even spin. I know they won’t survive the first drop, but I have a screw in place to quickly change to new ones.

One note I did find on the bombs: they just under an inch too long. Should have done the work before hand, but I’ll just go with them and see what happens. They won’t bump into the ailerons or flaps, so no worries there.